Do you need to setup your printer in the wireless mode? Or make your printer accessible over HP Smart app, HP Software or the entire printer setup? You will need to reset hp printer wifi. Besides the restoring the Wi-Fi setup mode also assists with troubleshooting the wireless-related connectivity issues.
In this blog we will curate the end-to-end instruction on resetting the Wi-Fi Setup Mode on HP Printers. Read along to know more with us.
Solution 1: Restoring Wi-Fi setup mode on printers with touchscreen display
- Initially, navigate to your printer control panel
- Then tap on the setup menu
- If the setup icon not available, click on the wireless icon
- Now choose Network setup option
- In the following select Restore Network Settings option
- Next click yes on the access prompt that will be displayed on the control panel
You have to wait for a minute or two to see the wireless light to turn into blue color. Keep that in mind, once your printer has entered into the default mode, you should finish the setup process with two hours or else you have to re-perform restoring the Wi-Fi setup mode process.
Solution 2: Restoring Wi-Fi setup mode on printers without a touchscreen display for HP ink tank and ink jet display
- Initially, navigate to your printer control panel
- Then press on the cancel button to wake your printer and keep it on ready mode
- Now press and hold the wireless and cancel button for some time
- That is until you see a flash from your power button
- Now, wait for a minute or two to see the wireless light to turn into blue color
Always keep in mind, once your printer has entered into the default mode, you should finish the setup process with two hours or else you have to re-perform restoring the Wi-Fi setup mode process.
Solution 3: Restoring Wi-Fi setup mode on printers without a touchscreen display
- Initially, navigate to your printer control panel
- Then press on the cancel button to wake your printer and keep it on ready mode
- Now press and hold the wireless and cancel button for some time
- That is until you see a flash from your power button
- Now, wait for a minute or two to see the wireless light to turn into blue color
Always keep in mind, once your printer has entered into the default mode, you should finish the setup process with two hours or else you have to re-perform restoring the Wi-Fi setup mode process.
Restore Wi-Fi Setup Mode on some of the special HP printers
For HP Laser Neverstop Printers
- Initially, navigate to your printer control panel
- Then press on the cancel button to wake your printer and keep it on ready mode
- Now press and hold the wireless button for some time
- That is until you see that your printer restart
- Now, wait for a minute or two
- That is until you see the wireless light turning blue
Make sure to finish the setup within 2 hours in your HP Laser Neverstop printers or else you have to perform the restoration process.
For HP Laser and Color Laser Series Printers
- Initially, navigate to your printer control panel
- Then press on the menu button
- Now press on the right navigation button from the printer control panel
- This will navigate to the network settings
- Next press ok
- In the following screen, choose Wi-Fi Default
- Then click ok
- Now, wait for a minute or two
Make sure to finish the setup within 2 hours or else you have to perform the restoration process.
For LaserJet M109-M112 Printers
- Initially, navigate to your printer control panel
- Then press on the resume or the cancel button to wake your printer and keep it on ready mode
- If it is not ready you can find it by the ready light is on but is dim
- Now press and hold the wireless button for 20 seconds
- That is until you see the attention light starts to blink on your printer control panel
- Now, slowly release the wireless button
You can see the printer getting restart with the wireless light blinks in the printer control panel. Make sure to finish the setup within 2 hours in your LaserJet M109-M112 printer or else you have to perform the restoration process.
For HP Deskjet 27 Series Printers
- Initially, navigate to your printer control panel
- Then press on the cancel to wake your printer and keep it on ready mode
- Now press and hold the wireless button and cancel button for some time
- That is like 5 seconds until you see the power lights blinks
- Now, wait for the blue light that is the wireless light to turn blue and to blink continuously
Make sure to finish the setup within 2 hours or else you have to perform the restoration process.
For Envy Series Printers
- Initially, navigate to your printer control panel
- Then press on the cancel or the resume button to wake your printer and keep it on ready mode
- Now press and hold the wireless button for some time
- That is until you see the power and attention lights blink
- Now, wait for a minute or two
Make sure to finish the setup in the HP envy printer within 2 hours or else you have to perform the restoration process.
Read more:
